Andres Industries - TIMRO-X Thermal Imaging

New product

The TIMRO-X™ is one of the smallest thermal imaging devices in the world. It can be used as a thermal imaging goggle as well as a thermal imaging aiming device on the weapon.

More details

More info

The TIMRO-X™ is one of the smallest thermal imaging devices in the world. It can be used as a thermal imaging goggle as well as a thermal imaging aiming device on the weapon. Of course, it can also be used as a hand-held device. Due to its PAL/NTSC output it can also be used as a stationary observation device. Many SEKs in Germany and military special units worldwide take advantage of the TIMRO-X™.

Available in: TIMRO-X/TIMRO-X35
difference:

TIMRO-X: 
zoom (digital): 1x, 2x, 4x, 8x
optical magnification: 1× (standard), 2×, 3×, 4× with magnification lens
field of view: horizontal 32° / vertical 26°
Length: 82mm
Width: 49mm
Height: 67mm

TIMRO-X35:
zoom (digital): 1,8×; 3,6×; 7,2×; 14,4×
optical magnification: 1,8× (standard); 3,6× or 5,4× with magnification lens
field of view: horizontal 18° / vertical 14°
Length: 82mm
Width: 49mm
Height: 79mm

Quick installation:
Even if the TIMRO-X™ is worn as goggles, it only takes seconds to remove it from the helmet and mount it on a STANAG rail (MIL-STD 1913). Thus, a thermal imaging monocular turns into a weapon sight optics with a range of up to 800m (with magnification lens).

  • Different reticles adjustable
  • Zoom up to 8× electronically and 3× optical with magnification lens
  • Settings for up to 8 weapons (also with magnification lens) can be stored

Attachment:
The TIMRO-X™ can also be used as a clip-on in combination with scopes whose magnification can be reduced to 1.5 times. A combination with different magnification lenses is also possible.

Side installation:
Another possibility to use the TIMRO-X™ in combination with a scope is the use of the side mount. Here, the TIMRO-X™ is mouted next to the scope. This allows both, optics and the thermal imaging device, to be used simultaneously. This makes the use during the day and the identification of targets in both wavelength ranges easier.

Use as thermal imaging goggles:
In term of size and weight, the TIMRO-X™ is one of the smallest thermal imaging devices on the market. This makes the device also suitable for use as thermal imaging goggles.

Advantages:

  • extremely small size and low weight; The TIMRO-X™ is up to 5cm shorter than conventional NVGs or thermal imaging goggles and with nearly 230g also much lighter.
  • Large field of view (>38 ° diagonal)
  • The electronic edge reinforcement enables better orientation in the terrain and even in smoke-filled rooms. This special filter even enhances the contrast of objects with low temperature differences and produces a picture similar to that of a residual light amplifier.
  • Can be used on all standard helmets
  • Quick Snap System: Both the attachment to the helmet and the weapon only takes seconds. A modification is not necessary.

Reviews

Write a review

Andres Industries - TIMRO-X Thermal Imaging

Andres Industries - TIMRO-X Thermal Imaging

The TIMRO-X™ is one of the smallest thermal imaging devices in the world. It can be used as a thermal imaging goggle as well as a thermal imaging aiming device on the weapon.

30 other products in the same category: