MOOG QPT-20 Series

New product

The QPT-20 Series of Pan & Tilt positioners are designed for a wide variety of sensor positioning applications. The QPT-20 Series are rugged and durable enough for virtually any environment, including port surveillance and mobile vehicle vision systems.

More details

More info

The QPT-20 Series of Pan & Tilt positioners are designed for a wide variety of sensor positioning applications. The QPT-20 Series are rugged and durable enough for virtually any environment, including port surveillance and mobile vehicle vision systems. The QPT-20 can handle payloads up to 8 lbs/ft and provides tabletop and/or tilt axis load mounting for multiple sensor array applications. Digital Serial Integrated Control (IC) units communicate via network interface or through a dedicated controller (e.g. UniCom®). If preferred, analog units are available as effective solutions where simple command and control are required without a PC.

Available Features:

  • Payloads up to 8 lb-ft (10.8 Nm)
  • Analog driven or Digital Serial Integrated Controller (IC) models
  • Mounting platforms include plain formed table top and table top with single tilt-axis connector
  • Internal wire table top for pass-through or IC sensor wiring on certain models
  • Fixed, Inverted or Mobile Installations
  • Mil-Spec Connectors
  • Tough metal housing and gearing for durability in harsh environments
  • Marine configuration that meets IP-67 standards
  • RF pass-through connectivity (RF rotary joint, 1 channel)
  • Shock & Vibration Mil-spec tested

Sensor Integration:

  • Multi-Spectrum Cameras (Visible/NIR/SWIR)
  • Thermal Imagers (LWIR)
  • IR and Visible Illuminators
  • Laser Range Finders
  • Communication Antennas

Specifications:

  • Load Capacity: 8 lb ft (10.8 Nm) maximum
  • Operating Voltage Range: 24VDC (±4VDC)
  • Total Power: Pan & Tilt Axes: 0.85A at 24VDC Heater: 2.7A at 24VDC Standby: <0.1A at 24VDC (no heater current)
  • Pan-Axis Range: 360° continuous rotation (slip ring) 435° (±217.5°) (non-slip ring)
  • Pan-Axis Speed: 2° - 35°/sec
  • Tilt-Axis Range: 180° (±90°)
  • Tilt-Axis Speed: 1.0° – 12°/sec
  • Internal Heater: Included standard, thermostatically controlled (32° on/35° off)
  • Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) With Heater: -30°C to 55°C -22°F to 131°F Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
  • Feedback: Optical Encoders (0.01° readout) or Potentiometers (0.25° readout)
  • Repeatability: 0.25° Duty Cycle 20%
  • Motor Type/Drive: Stepper and DC Brush
  • Communication to Pan & Tilt: RS232/422/485, IP Ethernet: 10/100 Base-T
  • Communication to Sensors: RS232/422, Ethernet Pass-Through
  • Control Protocol: QuickSet or Pelco D
  • Connector Specifications: Mil-Spec grade used on all configurations
  • Load Connector Interfaces: 1 Mil-Spec connector at tilt axis (certain models)
  • Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
  • Finish/Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
  • Weight: 14.3 lbs. (6.48 kg) depending on model

Additional information can be requested as well as the price and the form of delivery.

Reviews

Write a review

MOOG QPT-20 Series

MOOG QPT-20 Series

The QPT-20 Series of Pan & Tilt positioners are designed for a wide variety of sensor positioning applications. The QPT-20 Series are rugged and durable enough for virtually any environment, including port surveillance and mobile vehicle vision systems.